UL Bulletin
Published Date: April 14, 2003
Last Revision: January 25, 2017
Scope
005070-000000-0000001 Scope
1.1 These requirements cover:
a) Fans and blowers that circulate air, such as desk, ceiling-suspended, and hassock fans;
b) Fans and blowers that ventilate air, such as attic, whole-house window, through wall, and direct discharge fans;
c) Ducted fans and blowers that exhaust air to the outside of a building structure, such as in-line, wall insert and ceiling insert fans;
d) Dryer type fans used for drying carpets or floors;
e) Commercial display blowers;
f) Evaporative coolers;
g) Evaporative cooler replacement pumps;
h) Air-filtering appliances;
i) Component fans;
j) Low voltage component fans;
k) Residential cooking area fans, such as rangehoods and downdrafts;
l) Hand dryers without heater; and
m) Recirculating and blending units except as noted in 2(h).
These products are rated 600 volts or less and are intended to be employed in accordance with the National Electrical Code, ANSI/NFPA 70.
1.2 These requirements do not cover:
a) Air heaters incorporating fans, heating-ventilating units, or blowers comprising components of such equipment as furnaces, mechanical-refrigeration equipment, or air conditioners;
b) Fusible links, and the like, provided to disconnect a fan or close shutters in the event of fire;
c) Fans for use in cooking areas when the fan is intended for other than household use;
d) Fans intended to be used in hazardous locations as defined in the National Electrical Code, ANSI/NFPA 70;
e) Fans intended to be installed over solvents or chemically flammable liquids or vapors;
f) Fans located in chemically corrosive environments;
g) Humidifiers;
h) Fans intended to move heated or conditioned air;
i) Heated hand dryers;
j) Ionizers, products with ionization features, or electrostatic air cleaners;
k) Household or commercial blowers or inflators intended for use with inflatable bouncing toys or similar children's products.
l) Microwaves, ventilating or otherwise;
m) Ducted or non-ducted heat recovery ventilators;
n) Deodorizers and air fresheners.
Summary of Topics m0507_9,705_5,_20030414_sum.htmlSTP 507 (Subject 705)
Bulletin Dated: April 14, 2003
Summary of Topics
The following topics were discussed at the meeting:
1) STP Information and Updates
2) Additional Requirements to More Fully Address Retrofit Pumps
3) Clarification of UV Requirements for Stationary Evaporative Coolers Intended for Use and Provided with Polymeric Enclosures
4) Clarification of Requirements to Evaluate Evaporative Coolers for Wetting of Live Parts
5) Addition of Window Mount Test Requirements for Window Mounted Evaporative Coolers
6) Marking of HP Ratings for Appliances having Multiple Motors and/or Combination Loads
7) Fluorescent Light Kits
8) Live Parts Accessibility
9) Cords For Portable Products and Oscillating Fans
10) Installation Instructions for UL 507
11) Grounding Through Brushes
12) Static Load and Mounting Hardware
13) Positioning Requirement in Water Spray Test
14) Deletion of Resistivity Requirement in Water Spray Test
15) Duct or Plenum Mount Testing
16) Lights Employed in Cooking Area Appliances
17) Solid State Speed Control Testing
18) Drop Test Clarification
19) Guarding of Moving Parts and Mounting Height Exceptions
20) Marking Height Requirement for UL 705
21) Class E, F, and H Insulation Systems for UL 705
22) Class E Insulation Systems for UL 507
23) Plastic Requirements for UL 507
24) Plastic Requirements for UL 705
25) Capacitor Recognition
26) Running Heating Test
27) Motor Standard Changes
28) Supplement SA Revisions
29) Open Frame Motors
30) Markings for Wall and Ceiling Insert Fan Polymeric Enclosures
31) Fan Flame Spread Requirements
32) Cold Temperature Impact Requirement
33) Quick Connect Ground Terminations and Interconnections
34) Ceiling Fan Blade Brackets and Mounting Means
35) Mix and Match Ceiling Fan Assemblies
36) Miscellaneous Revisions for UL 507
37) Editorial New Edition and Miscellaneous Revisions for UL 705
Back to Standard 507, Edition 9