UL CSDS Proposal
Published Date: June 12, 2009
Last Revision: January 30, 2015
Scope
002950-000000-0000001 Scope
1.1 These requirements cover commercial-industrial gas burners with input ratings over 400,000 Btu per hour (117.23 kW) intended for installation in heating equipment such as, but not limited to, appliances, furnaces, heaters, ovens, water heaters, and incinerators. These gas burners are required to be equipped with integral automatic primary safety controls to restrict the abnormal flow of gaseous fuel in case of ignition failure and/or flame failure.
1.2 Additional installation and operation requirements are available for commercial-industrial gas burners, as defined by the National Fuel Gas Code, NFPA 54 and by the Liquefied Petroleum Gas Code, NFPA 58, as applicable.
Summary of Topics b0295_1_20090612_sum.htmlSubject 295
Bulletin Dated: June 12, 2009
SUMMARY OF TOPICS
The following changes in requirements to the Standard for Commercial-Industrial Gas Burners, UL 295, are being proposed:
1. Use of cable that complies with the crush and impact requirements of Type MC cable.
Back to Standard 295, Edition 1