UL CSDS Proposal
Published Date: June 24, 2015
Last Revision: July 19, 2023
Scope
002620-000000-0000001 Scope
1.1 These requirements cover gate valves intended for installation in piping systems supplying water for fire-protection service. Gate valves covered by these requirements are of the outside-screw-and-yoke type or of the nonrising stem type, the latter for installation either above or below ground.
1.2 The gate valves covered by these requirements are intended for installation and use in accordance with the Standards for:
a) Low Expansion Foam , NFPA 11;
b) Installation of Sprinkler Systems, NFPA 13;
c) Installation of Standpipe and Hose Systems, NFPA 14;
d) Water Spray Fixed Systems for Fire Protection, NFPA 15;
e) Deluge Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16;
f) Installation of Centrifugal Fire Pumps, NFPA 20;
g) Water Tanks for Private Fire Protection, NFPA 22; and
h) Installation of Private Fire Service Mains and Their Appurtenances, NFPA 24.
Summary of Topics b0262_8_20150624_sum.htmlSubject 262
Bulletin Dated: June 24, 2015
SUMMARY OF TOPICS
The following changes in requirements to the Standard for Gate Valves for Fore-Protection Service, UL 262, are being proposed for preliminary review and comment only:
1. For Preliminary Review Only: Proposed Revision to Marking Requirements in 29.2 and 29.5
Back to Standard 262, Edition 8