Browse & Buy UL Standards
Standard 111, Edition 6

UL LLC Outline of Investigation for Multioutlet Assemblies

UL Outline © 2017 UL LLC
111, Edition 6 Edition Date: September 21, 2018 $225.00-$250.00
Summary of Topics o0111_6_sum.html

Summary of Topics

This Sixth Issue of the Outline of Investigation for Multioutlet Assemblies, UL 111, covers:

Editorial revisions and clarifications throughout the document to improve clarity and usability above the Fifth Issue content.

Revisions and Related Documents

Red Line Std. (0)

Showing 10 of XX
Show All None available.

Proposals (0)

Showing 10 of XX
Show All None available.


Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All

Other Updates (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All

Referenced Standards (64)

Below is a list of UL Standards referenced in UL 111

1 11 Standard for Flexible Metal Conduit
4 15 Standard for Armored Cable
5 15 Surface Metal Raceways and Fittings
5A 4 Nonmetallic Surface Raceways and Fittings
5B 2 Standard for Strut-Type Channel Raceways and Fittings
5C 3 Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits
6 14 Standard for Electrical Rigid Metal Conduit - Steel
6A 2 Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel
13 4 Power-Limited Circuit Cables
20 14 General-Use Snap Switches
48 15 Standard for Electric Signs
50 13 Enclosures for Electrical Equipment, Non-Environmental Considerations
62 20 Flexible Cords and Cables
83 16 Standard for Thermoplastic-Insulated Wires and Cables
94 6 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
183 4 Manufactured Wiring Systems
244A 3 Standard for Solid-State Controls for Appliances
310 9 Standard for Electrical Quick-Connect Terminals
452 7 Standard for Antenna - Discharge Units
467 10 Grounding and Bonding Equipment
486C 7 Splicing Wire Connectors
486E 5 Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
496 14 Lampholders
497 7 Standard for Protectors for Paired-Conductor Communications Circuits
497A 3 Standard for Secondary Protectors for Communications Circuit
497B 4 Standard for Protectors for Data Communications and Fire-Alarm Circuits
497C 2 Standard for Protectors for Coaxial Communications Circuits
498 16 Attachment Plugs and Receptacles
498A 2 Current Taps and Adapters
514A 11 Metallic Outlet Boxes
514B 6 Standard for Conduit, Tubing, and Cable Fittings
514C 4 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
514D 2 Standard for Cover Plates for Flush-Mounted Wiring Devices
635 3 Insulating Bushings
746C 7 Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
758 3 Appliance Wiring Material
796 12 Printed Wiring Boards
840 3 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
916 5 Standard for Energy Management Equipment
943 5 Ground-Fault Circuit-Interrupters
962A 5 Furniture Power Distribution Units
969 5 Standard for Marking and Labeling Systems
1059 5 Standard for Terminal Blocks
1077 7 Standard for Supplementary Protectors for Use in Electrical Equipment
1283 7 Electromagnetic Interference Filters
1363 5 Standard for Relocatable Power Taps
1439 5 Standard for Tests for Sharpness of Edges on Equipment
1449 5 Surge Protective Devices
1598 4 Luminaires
1681 4 Standard for Wiring Device Configurations
1682 5 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type
1686 4 Standard for Pin and Sleeve Configurations
2024 5 Standard for Cable Routing Assemblies and Communications Raceways
2108 2 Standard for Low Voltage Lighting Systems
2237 1 Multi-Point Interconnection Power Cable Assemblies for Industrial Machinery
2238 3 Cable Assemblies and Fittings for Industrial Control and Signal Distribution
2459 1 Insulated Multi-Pole Splicing Wire Connectors
8750 2 Light Emitting Diode (LED) Equipment for Use in Lighting Products
1004-1 2 Rotating Electrical Machines - General Requirements
1004-2 2 Standard for Impedance Protected Motors
1004-3 2 Standard for Thermally Protected Motors
486A-486B 3 Standard for Wire Connectors
60601-1 1 Medical Electrical Equipment, Part 1: General Requirements for Safety
61058-1 5 Switches for Appliances - Part 1: General Requirements
Showing 10 of XX
Show All

Reverse Referenced Standards (0)

Showing 10 of XX
Show AllNone available.

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.


You have one or more subscriptions that will expire soon.


You have one or more licenses to assign