1.1 These requirements cover self-contained, payment-accepting, vending machines. that vend non-refrigerated products to be employedVending machines covered by these requirements are intended for connection to alternating- or direct-current circuits rated 600 V or less in accordance with ANSI/NFPA 70 and:. Vending machines as covered by this standard are intended for indoor use only, except that they will be investigated for outdoor use or use in a protected location if so designated by the manufacturer. Vending machines may be battery operated and may be provided with a solar photovoltaic (PV) system. If a vending machine vends a non-refrigerated product but is provided with a refrigerated section, then the refrigerated section shall be evaluated to the relevant requirements in UL 541.

1. a) Are intended for indoor use only, except that they will be investigated for outdoor use or use in a protected location if so designated by the manufacturer;

2. b) Are intended for vending only non-refrigerated or heated products except that they may vend:

   1. 1) Refrigerated products in addition to vending non-refrigerated or heated products; or

   2. 2) Products that are intended to be heated or warmed before being refrigerated and then dispensed (e.g., iced coffee).

3. c) Are intended for installation within motor fuel dispensing facilities in accordance with Supplement SA, Requirements for Vending Machines Intended for Installation within Motor Fuel Dispensing Facilities, and as defined by NFPA 30A;

4. d) May be provided with ultraviolet (UV) radiation lamp systems in which the UV wavelengths are 200 nm or greater; however, the effectiveness of the water treatment by the UV radiation is not covered by these requirements;

5. e) May be battery operated;

6. f) May be provided with a solar photovoltaic (PV) system; and

7. g) Vend a tangible, consumable product (not a service, such as a product “rental” in which the product is intended to be returned).

1.2 DeletedThese requirements also cover vending machines intended for installation within motor fuel dispensing facilities in accordance with Supplement SA, Requirements for Vending Machines Intended for Installation within Motor Fuel Dispensing Facilities, and as defined by NFPA 30A.

1.2A In reference to 1(b), if a vending machine is provided with a refrigerated section, the refrigerated section shall be evaluated to the relevant requirements in the Standard for Refrigerated Vending Machines, UL 541.

1.3 These requirements do not cover: sound-recording and reproducing machines.

1. a) Sound-recording and reproducing machines;

2. b) Vending machines intended to vend only refrigerated products. Such products are covered by UL 541;

3. c) Gaming or amusement machines. Such machines are covered by the Standard for Amusement and Gaming Machines, UL 22;

4. d) Waste disposal and/or recycling machines in which the machine provides payment (cash, credit, etc.) in exchange for disposed and/or recycled product(s) that may be inserted into the machine;

5. e) Display, inventory control or similar machines that do not have a payment accepting means but from which a product may be obtained;

6. f) Machines that rent product(s) intended to be returned (e.g., airport luggage carts);

7. g) Machines in which a service is being purchased (e.g., shoe polishing machines);

8. h) Products that would otherwise be considered for household (non-commercial) use if no payment means were provided; or

9. i) Automated freestanding stationary building structures.

1.4 DeletedThese requirements do not cover vending machines intended to vend refrigerated products. Such products are covered by UL 541.