1 Scope

1.1 These requirements apply to power-operated dispensing devices, rated 600 V ac or less, for use with motor fuels. Motor fuels, as defined by these requirements, include one or more of the fuels described in 2.

1.2 Dispensing devices covered by these requirements are intended for use with one or more of the following:

1. a) Gasoline formulated in accordance with the Standard Specification for Automotive Spark-Ignition Fuel, ASTM D4814;

2. b) Gasoline/ethanol blends with nominal ethanol concentrations up to 25 percent ethanol (E25), consisting of gasoline formulated in accordance with the Standard Specification for Automotive Spark-Ignition Fuel, ASTM D4814, when blended with denatured fuel ethanol formulated to be consistent with the Standard Specification for Denatured Fuel Ethanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel, ASTM D4806; or

3. c) Gasoline/ethanol blends with nominal ethanol concentrations above 25 percent formulated in accordance with the Standard Specifications in item (b) or formulated in accordance with the Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines, ASTM D5798, as applicable.

Summary of Topics

This revision of ANSI/UL 87A dated January 14, 2020 includes the following:

Add 16 percent isobutanol/gasoline blend; 1.8, 27.2, 29.1.1, 29.1.2, 33.2, 33.2A, 34.2, 34.2A, 42.4, 42.4A, 45.1.1, Supplement SA

Adding zones to the different divisions; 3.2, 3.5, 3.21, 3.22, 7.6, 21.1, Section 24, 25.7, 25.11, Figure 3.1, Figure 3.2, Figure 7.1, and Figure 8.1.