Browse & Buy UL Standards
Standard 1795, Edition 5

Standard for Hydromassage Bathtubs

UL Standard
Standard 1795, Edition 5 Edition Date: September 02, 2016 $716.00-$1,567.00

Revisions and Related Documents

Revisions
Red Line Std. (8)

Date      
December 08, 2017 Redline Revision
August 25, 2017 Redline Revision
April 28, 2017 Redline Revision
October 07, 2016 Redline Revision
Showing 10 of XX
Show All

CSDS
Proposals (3)

CSDS Proposal   

CSDS Proposals

An electronic document associated with a UL Standard for Safety or Outline of Investigation, and issued by UL to propose:

  • A revision of a single or multiple requirement(s).
  • A complete new edition of an existing Standard or Outline.
  • A new Standard or Outline that has not previously been published.

CSDS Proposals provide access to view the proposal and submit comments within UL's Collaborative Standards Development System (CSDS) appropriately.

×

October 20, 2017
July 14, 2017
March 24, 2017
Showing 10 of XX
Show All

UL LLC CRD (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All

Other Updates (0)

Showing 10 of XX
Show All None available.
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All
Showing 10 of XX
Show All

Referenced Standards (83)

Below is a list of UL Standards referenced in UL 1795

StandardEditionTitle
20 14 General-Use Snap Switches
44 19 Thermoset-Insulated Wires and Cables
62 20 Flexible Cords and Cables
66 2 Fixture Wire
67 13 Panelboards
83 16 Standard for Thermoplastic-Insulated Wires and Cables
94 6 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
157 2 Standard for Gaskets and Seals
244A 3 Standard for Solid-State Controls for Appliances
310 9 Standard for Electrical Quick-Connect Terminals
353 5 Standard for Limit Controls
486E 5 Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
489 13 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures
496 14 Lampholders
498 16 Attachment Plugs and Receptacles
508 18 Standard for Industrial Control Equipment
512 1 Standard for Halogenated Agent Hand and Wheeled Fire Extinguishers
746C 7 Standard for Polymeric Materials - Use in Electrical Equipment Evaluations
746D 8 Standard for Polymeric Materials - Fabricated Parts
758 3 Standard for Appliance Wiring Material
796 12 Printed Wiring Boards
810 6 Standard for Capacitors
817 12 Standard for Cord Sets and Power-Supply Cords
840 3 Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment
873 12 Standard for Temperature-Indicating and -Regulating Equipment
917 5 Standard for Clock-Operated Switches
969 5 Standard for Marking and Labeling Systems
991 3 Standard for Tests for Safety-Related Controls Employing Solid-State Devices
1030 8 Standard for Sheathed Heating Elements
1059 5 Standard for Terminal Blocks
1097 6 Double Insulation Systems for Use in Electrical Equipment
1310 7 Standard for Class 2 Power Units
1332 5 Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
1411 7 Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances
1412 5 Standard for Fusing Resistors and Temperature-Limited Resistors for Radio- and Television- Type Appliances
1431 3 Standard for Personal Hygiene and Health Care Appliances
1434 1 Standard for Thermistor-Type Devices
1439 5 Standard for Tests for Sharpness of Edges on Equipment
1795 5 Standard for Hydromassage Bathtubs
1977 3 Standard for Component Connectors for Use in Data, Signal, Control and Power Applications
2097 4 Reference Standard for Double Insulation Systems for Use in Electronic Equipment
2111 1 Standard for Overheating Protection for Motors
248-1 3 Low-Voltage Fuses - Part 1: General Requirements
248-2 2 Standard for Low-Voltage Fuses - Part 2: Class C Fuses
248-3 2 Standard for Low-Voltage Fuses - Part 3: Class CA and CB Fuses
248-4 2 Standard for Low-Voltage Fuses - Part 4: Class CC Fuses
248-5 2 Standard for Low-Voltage Fuses - Part 5: Class G Fuses
248-6 2 Standard for Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
248-7 2 Standard for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
248-8 3 Low-Voltage Fuses - Part 8: Class J Fuses
248-9 2 Standard for Low-Voltage Fuses - Part 9: Class K Fuses
1004-1 2 Standard for Rotating Electrical Machines - General Requirements
1004-2 2 Standard for Impedance Protected Motors
1004-3 2 Standard for Thermally Protected Motors
1004-7 3 Standard for Electronically Protected Motors
248-10 3 Low-Voltage Fuses - Part 10: Class L Fuses
248-11 3 Low-Voltage Fuses - Part 11: Plug Fuses
248-12 3 Low-Voltage Fuses - Part 12: Class R Fuses
248-15 3 Low-Voltage Fuses - Part 15: Class T Fuses
4248-1 2 Fuseholders - Part 1: General Requirements
4248-4 1 Fuseholders - Part 4: Class CC
4248-5 1 Fuseholders - Part 5: Class G
4248-6 2 Fuseholders - Part 6: Class H
4248-8 2 Fuseholders - Part 8: Class J
4248-9 1 Fuseholders - Part 9: Class K
5085-1 1 Low Voltage Transformers - Part 1: General Requirements
5085-2 1 Low Voltage Transformers - Part 2: General Purpose Transformers
5085-3 1 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
60691 4 Standard for Thermal-Links - Requirements and Application Guide
4248-11 1 Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
4248-12 2 Fuseholders - Part 12: Class R
4248-15 1 Fuseholders - Part 15: Class T
486A-486B 3 Standard for Wire Connectors
60601-1 1 Medical Electrical Equipment, Part 1: General Requirements for Safety
60730-1 5 Automatic Electrical Controls - Part 1: General Requirements
60947-1 5 Low-Voltage Switchgear and Controlgear - Part 1: General rules
61058-1 5 Switches for Appliances - Part 1: General Requirements
60384-14 2 Safety Requirements for Fixed Capacitors for Use in Electronic Equipment - Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains
60730-2-6 3 Standard for Automatic Electrical Controls - Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements
60730-2-9 4 Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls
60947-7-1 4 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
60947-7-2 4 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors
60947-7-3 3 Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks
Showing 10 of XX
Show All

Reverse Referenced Standards (2)

UL 1795 is referenced in the following list of UL Standards

The cost to purchase this Standard varies depending on whether you are ordering a hardcopy, PDF or combination of the two. We also offer two different types of subscriptions: a one year and a three year.

You will be able to choose your purchase options on the following pages.

×
×
×
×
×

You have one or more subscriptions that will expire soon.

×

You have one or more licenses to assign

×